Currency Switcher

WOOCS 2.1.7

Typical scenarios for the integration of the Broadway 3D system into access control systems are described here. These scenarios may be regarded as a point of departure, allowing users to familiarize themselves with Broadway 3D's integration scheme in an existing or planned access control system. Typical solutions permit the volume of work to be estimated approximately, and help determine the selection of essential equipment.

It is assumed that Broadway 3D operates in a protected environment, i.e. that the data transfer lines are defended from unauthorized access.

 

1. The Office solution

View the office solution scheme

A serverless solution, applied during the initial testing and organization of Broadway 3D access control to a large site or in the context of a small office.

Key features of this solution:

  • low cost,

  • space-saving implementation,

  • acceptable security level.

  Basic data
Number of transit points 1 – 3
Number of visitor registration points 11
Size of visitor database 1 – 500
Modes of operation identification, verification
Format of visitor database utilizes MySQL base in the format Artec Biometric DB (see Appendix 1)

Uses one device (i.e. its local database) as visitor database storage. All devices at transit points work from a unified visitor database.

Visitor registration (re-registration) is carried out at any of the transit points via a Web interface, or on a separate registration device with the software Artec Enrollment Application (TEA). Simultaneous registration at several transit points is not supported. The addition and deletion of visitors is realized through a Web interface or TEA. The operational parameters of each of the transit points are set individually.

To ensure that the complex operates reliably, there must be a dependable network (LAN) connection of all access points with the unit where the visitor database is located.

Transit points are opened by means of relay or transmission of Wiegand CID to the ACS controller.

 

Advantages and disadvantages

 

 

Ease of customization and installation

 

 

 

Unwieldy management of the package in potential circumstances (in the event of future expansion of the system) where the recommended restrictions on the number of transit (or registration) points, or on the size of the visitor database, are exceeded.

 

 

 

Variations

Where necessary, a stand-alone device for the organization of isolated registration points may be used.

 

2. Office server solution

View the office server solution scheme

The key features of the server solution are low cost, a high level of security, increased reliability in recognition device operability, and the possibility of tracking work time. The scenario is analogous to the serverless solution, with the exception of the use of a discrete server in which to house the visitor database.

  Basic data
Number of transit points 1 – 10
Number of visitor registration points 1
Size of visitor database 1 – 1000
Modes of operation identification, verification
Format of visitor database uses MySQL base in the format Artec Biometric DB (see Appendix)

In order to operate in verification mode requires the presence of a complete access control infrastructure using Wiegand cards. In such a case Broadway 3D is installed between card reader and the ACS controller

The visitor database should be installed on a discrete junction, where a back-up copy must be ensured.

 

Advantages and disadvantages

 

 

Low cost

 

 

 

Increased reliability in the operation of recognition devices

 

 

3. Corporate solution

View the corporate solution scheme

What is important in scenarios for the use of Broadway 3D in the corporate sector is operational system reliability, good scalability of the solution, and a guarantee of high security with the assistance of a complex approach (multilevel authorization).

In order to realize this scenario, a close integration of Broadway 3D into the existing or planned ACS is required.

  Basic data
Number of transit points >3
Number of visitor registration points >1
Size of visitor database 1 – 10000
Modes of operation mixed (identification and verification)
Format of visitor database Any at the choice of the integrator.

For the centralized management of the whole complex, which includes Broadway 3D, a separate application1 (ACS+Broadway 3D) is required, which will effectively resolve this task. The management of transit points with Broadway 3D may be realized with the assistance of Artec Broadway 3D SDK and Artec Database SDK.

Transit points may be operated in different modes (for instance, this may be determined by the security level of a zone).

ACS+Broadway 3D may control the condition of a transit point and may configure it with the assistance of Artec Broadway 3D SDK. In addition the biometric template of the registered visitor is received with the assistance of this SDK.

It is possible to manage the visitor list at the transit point with the assistance of Artec Database SDK, which works directly with the local device's database. For increased reliability and security Broadway 3D utilizes only a local visitor database. The local visitor database contains only that list of visitors which was loaded from the main database, and which is fully controlled by the ACS+Broadway 3D. In this way, the integrator who develops ACS+Broadway 3D, is free to choose the technical means to perform the storage of visitor data. The sole requirement on the part of Broadway 3D with regard to storage is the presence there of the biometric data and of some metadata2, which, in its turn, is loaded onto the local Broadway 3D database. The process for renewing the local Broadway 3D database depends on the requirements presented. For example, ACS+Broadway 3D may renew the database at the transit points according to a schedule, or immediately after an addition (or alteration) to the visitor database.

Besides this, when a constant network connection with the transit points is present, ACS+Broadway 3D may perform event monitoring (results of recognition, etc.).

The statistics for recognition are stored in the Broadway 3D local database and accordingly may be acquired by ACS+Broadway 3D and stored in the main database.

 

Advantages and disadvantages

 

 

Flexibility in the selection of means for implementing solutions

 

 

 

Integration is essential

 

 

Notes

  • The acquisition of events from Broadway 3D is possible only where a constant network connection is present – information about events which have taken place is not stored in Broadway 3D.


1. Is not part of the components of Broadway 3D, but is developed by the integrator at the request of a concrete client.

2. Requires as a minimum the presence of CID to be compared with the visitor and his biometric template.

 

Appendix 1: Artec Biometric DB

This is a MySQL database, the format of which is described in a separate document. The database format may alter as a result. The possibility of expanding the database with additional fields and tables in accordance with external requests is not envisaged.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.