Waist-High Turnstile
(outdoor application)
servo driven 180°
Skiline turnstiles was specifically designed for the ski resorts. It is suitable for projects of any size: from one down slope to bigger ski resorts with lots of slopes and flanks of various difficulties.
The virtue of the human height reader post, pass through the turnstile will not cause any inconvenience to the skier. A wide range reader enables the seamless pass through by only apploaching the post less than 40 cm to get authorized access and set the bar rotate by a slight push to it.
Due to its design DUOPOD turnstile, in open (Go thru) MODE is an obstacle free pass way for the authorized users since both rods are in the bottom position which eliminates the problem of poking it with the your skis.
Controlled by
· access control system;
· manual control.
When power goes OFF both directions are free.
Electrical Specifications
· Voltage:
- from the AC (100–240) V, 50/60 Hz.
- from a DC source 12 V.
· Maximum power consumption:
- indoor 55 W per pass;
- outdoor 155 W per pass.
· Degree of protection according to GOST 14254-96:
- indoor IP41;
- outdoor IP54.
| Technical specs:
Construction with barrier rods from stainless steel by thickness of 40 mm |
Draft: |
| Length |
Duopod turnstile - 742 mm
Reader post - 1010 mm |
| Width |
Duopod turnstile - 342 mm
Reader post - 820 mm |
| Height |
Duopod turnstile - 932 mm
Reader post - 1655 mm |
| Crossing capacity in free access mode |
60 person/min |
| Crossing capacity in single access mode |
25 person/min |
| Passage width |
550 mm |
| Weight |
Duopod turnstile - not more 45 kg
Reader post - not more 55 kg |
